Features and benefits
• Onboard Web Interface – Can be installed for direct access right out of the box or it can be configured as part of a larger integrated solution using the DSView 3 management software
• IP and Serial Interface Options – Options to install by connecting directly to the network or save IP connections by using the serial interface to connect directly to Avocent appliances already connected to the network
• Daisy Chaining – Saves the number of IP addresses or console/KVM ports that are required to manage all power distribution needs
• Electronic Overcurrent Protection (OCP) – An added layer of protection that is activated in the event of minor overloads; during such events, outlets are turned off first instead of the primary OCP tripping
• Sequential Startup – Protects integrity of all upstream electrical infrastructure by staggering the inrush current draw of all plugged-in devices
• Supports Environmental Sensors – Chain up to six environmental sensors per PDU to measure and monitor temperature and humidity at several different points within the rack for notification of any impending environmental issues
• Outlet-Level, Phase-Level and Strip-Level Metering with Threshold/Alert Capabilities – Provides preemptive notification of any impending overload issues before they occur and simplifies the task of installing new equipment Note - measurement resolution +/- 5%
• Capability to Remotely Switch Outlets Through Onboard Web Interface, DSView 3 Management Software – Allows power to hung up IT equipment to be recycled, turned on or turned off remotely for faster resolution time (not available on PM 1000 or PM 2000 PDUs)
• Integration with DSView 3 Management Software – Single interface for management of IT equipment and PDUs simplifies mapping of outlets to servers and other equipment in order to reduce and minimize power cycling the wrong equipment
• Integration with DSView 3 Software Power Manager Plug-In – Track historical trends to measure and monitor IT power consumption, capacity and cost in order to understand what issues exist and to make more informed decisions in the future
Specifications
ENVIRO NMENTAL SENSOR
Physical Dimensions (W x D x H)
3 x 3 x 1.5 in. (7.6 x 7.6 x 3.8 cm)
Temperature Sensor
Range: -45° to +115°C
Accuracy: 1.2°C
Humidity Sensor (PMHD-THS only)
Range: -0 - 100%
Accuracy: 4%
Daisy Chaining Capability
Up to 3 sensors per PDU sensor port
External Power Required
No
Cable Type
Standard CAT-5 Patch Cable
Maximum Cable Length
1200 ft. (between the PDU and the last sensor
in the daisy chain)
PM 3000/2000/1000 PDU firmware compatibility
Version 1.3.0 and higher
HARDWARE
Environmental
Operating Temperature: 50° to 113°F (10° to 45°C)
Storage Temperature: -40° to 149°F (-40° to 65°C)
Network Connection
Number: 1
Type: 10/100/1000 Ethernet
External Sensor Connections:
Number: 2
Type: RJ-45
Accessories Included
Rack-mount kit, toolless-mounting hardware
with vertical models and outlet retention clips
Warranty
Two Years
Weight
3- and 6-outlet horizontal models:
27.3 lbs. without power cord
10-outlet horizontal models:
5.2 lbs. without power cord
24-outlet vertical models:
14.8 lbs. without power cord
20-outlet vertical models:
11 lbs. without power cord
Physical Dimensions (W x D x H)
3- and 6-outlet horizontal models:
17 x 8.272 x 1.719 in. (43.2 x 21 x 4.4 cm)
10-outlet horizontal models:
17 x 5.5 x 1.7 in. (43.2 x 14 x 4.3 cm)
24-outlet vertical models:
2.2 x 3.15 x 66 in. (5.6 x 8 x 167.6 cm)
20-outlet vertical models:
2.2 x 3.2 x 52 in. (5.6 x 8.1 x 132.1 cm)
Note: PM 1000 PDU height is 46 in. (116.8 cm)
Communications options supported
Browser, CLI, SNMP, Serial or IP (using DSView 3
software or supported Avocent appliances)
Standards
Approved Agency: UL, FCC, cUL, CE, VCCI,
C-Tick, CB
No comments:
Post a Comment