Lighting - Color Block

The Color Block's modular design and comprehensive range of fixing options allows users to easily create a complete LED system using stock of just one generic fixture type - including battens, blinders and various mounting configurations using the built in fixing.

Each block features four sets of 3 high output RGB LEDs which produce an intense, powerful light and vibrant colors across the spectrum.

Designed to be intelligent both inside and out, the modular blocks incorporate the latest HSI (Hue, Saturation and Intensity) control as well as RGB, and Variable Effects Engine software which gives the lighting designer full control over color and effects combinations.

The product's lightweight yet robust, heavy gauge aluminium extruded construction houses a discreet cable management system and additional protection is built around the LED lenses for a truly road proof fixture.



L to R: Gold, Black, Chrome, Green, Red, Pewter, Champagne, Blue, Light Bronze

All-purpose design - create an LED system using stock of one generic fixture
Modular construction - easily configured as battens, blinders or tubes
Variable Effects Engine - full control of color & effects parameters
HSI (Hue, Saturation & Intensity) and RGB control - enhanced color adjustment
Range of fixings - suitable for wall, floor, truss, stand & vertical hanging
Efficient thermal management - improved brightness and light output levels
Heavy gauge anodized aluminum extrusion - lightweight but extremely robust
Slimline design with cable management - perfect for discreet installation
Whisper quiet cooling fan - safe, efficient & optimal operation in all conditions
PSU with on-board memory - store & play back looks in stand alone mode




Color Block DB4 Specifications
Product Code: CHCB4
Width (no fixings): 9.8"
Height (no fixings): 2.4"
Depth (no fixings): 4.6"
Weight: 3.1lbs
Power Consumption: HSI = 0.45A@48VDC,
RGB = 0.9@48VDC
Connectors: XLR4
Color: Black anodized
Cooling Fans: 2 × DC
No. of LED Heads: 4 × 3 RGB
Lamp Life: Up to 25,000 hours
Variable Effects Engine Parameters: Color spread, scroll, grouping, step, strobe, color roll, speed, fade (up/down) and resolution
Beam angle: 14° (at 50% of peak illuminance)
Standalone: Yes, via built-in software
Fixing Methods: Built-in M10 socket for stand mount or vertical hanging
Quick release catch



Color Block Photometric Performance
Optics: Specialized close focus lens
Source: 12 LEDs each with individual control (4 red, 4 green, 4 blue)
Beam angle: 14° (at 50% of peak illuminance)
Distribution: Symmetrical direct illumination
CCT: Adjustable 1000 – 10,000K
CRI: Not measurable
Color Gamut: Performance Enhanced




more : http://www.aclighting.com

Lighting - Color Split

Twice the Possibilities from a Single LED Fixture
The new Chroma-Q™ Color Split is a compact, high output LED fixture providing designers with twice the possibilities.


Bold single colour or dramatic split colour effects
Based around the Color Block's modular, multi-purpose design, the Color Split features larger dual side-by-side RGBA cells. This ingenious configuration provides designers with the flexibility to light with a bold single colour or project a wide range of dramatic split colour effects from a single LED fixture - making it ideal as a truss toner for illuminating the uprights and crossbraces.




Smooth colour wash from top to bottom of a surface
The Color Split's advanced split beam technology also provides a very even, soft beam output, similar to a Fresnel fixture, for a smooth colour wash from top to bottom of a surface without hotspots. A wide-angle lens in one cell evenly washes the lower portion of a wall or drape while a narrow lens in the second cell projects the beam higher. The fixture is also very bright and has a smooth, linear dimming curve.



Amber mixing for warmer colours & superior colour rendition
In addition to the standard RGB and latest HSI (Hue, Saturation and Intensity) control modes found in the Color Block, the Color Split also features unique 3 channel RGB (Magic Amber) and 4 channel RGBI (Magic Amber) modes which automatically and seamlessly blend the Amber alongside the RGB LEDs. By adding Amber to the colour-mixing process, a better range of warmer colours can be achieved, resulting in an enhanced colour gamut and therefore superior colour rendition index (up to 82%).



High brightness for demanding lighting environments
With a 620 lumen output, the Color Split is also extremely bright, making it ideal for even the most demanding lighting environments and applications.



Built in power supply & standalone mode
For maximum versatility, the Color Split features a built-in power supply and choice of control modes - the fixture can be operated in a standalone mode featuring 99 selectable effects or connected to DMX and controlled using additional equipment.



Wide variety of effects lighting applications
As well as making a highly effective wall washer and truss toner, the Color Split's modular, interlocking design and versatile yoke mounting makes it ideal for providing a wide variety of other effects lighting applications as well in the touring, rental, TV, theatre, tradeshow and indoor architectural sectors.



Broad choice of effects & fixing options
Units can be floor, truss or wall mounted and used individually or easily connected together to provide battens, blinders, footlights, side fills, cyclorama floods, discreet set piece lighting and interior architectural lighting applications - all from just a single fixture.



- Dual side-by-side RGBA LED cells - bold single colour or dramatic split colour effects
- Advanced split beam technology - smooth colour wash from top to bottom of a surface
- Magic Amber control modes - warmer colours range & superior colour rendition
- Built-in power supply - no additional costs
- Choice of standalone or DMX control - for maximum versatility
- Modular construction - easily configured as a wide variety of shapes
- Smooth, linear dimming curve - for most demanding lighting applications
- All-purpose design - create an LED system using stock of one generic fixture
- Range of fixings - suitable for wall, floor, truss, stand & vertical hanging





Color Split Specification


Product Code: CHCS2
Dimensions (no fixings): 250mm w x 136mm h x 125mm d
9.8" w x 5.3" h x 4.9" d
Weight: 2.38kg / 5.25lbs
Power Consumption: 90-240V AC, 120W
Lumen Output: Red 250 Lumen
Green 375 Lumen
Blue 91 Lumen
Amber 175 Lumen
White 620 Lumen


LED cells: 2
LEDs per cell: 4 x RGBA
Total LEDs: 32
Beam dispersion: 23°
Lamp life: up to 25,000 hours
IP Rating: IP20
Control types: Single / dual - HSI, RGB, RGB (*Magic Amber) & RGBI (*Magic Amber)
Standalone mode: Yes
Built-in effects: Yes
Mains connector: PowerCon in/thru
DMX connector in/out: XLR5 in/thru
Control: ANSI E1.1 DMX-512A
Cooling fans: 1
Colour: Black anodised
Built-in hardware: Interlocking system & quick release catches for connecting as battens
2 × M10 nuts for additional fixings
Accessories Included: Yoke / floor stand





Accessories


CHCBBK20 : 20 deg beam kit for Color Block/Color Split
CHCBBK30 : 30 deg beam kit for Color Block/Color Split
CHCBBK3005 : 30 x 5 deg beam kit for Color Block/Color Split
CHCBBK6010 : 60 x 10 deg beam kit for Color Block/Color Split



more : http://www.aclighting.com

Lighting - Cascades

With a color palette of over 300 colors & suitable for fixtures with up to 50 degree beam angles without light loss, the innovative Cascade color changer offers exceptional flexibility. Supplied complete with special gel strings, two control modes are available to offer either 100 pre-defined "Library" colors or full CMY color mixing "Creative" mode. The innovative universal mounting system is incorporated ensuring the compact & lightweight unit is easy to use. Requires additional power supply.


Specifications:
Product Code: CQ3 Click for larger image

A: 12"
B: 13.4"
C: 4"
Weight: 5.6lbs
Aperture: 6.9"
Frame Capacity: +300 colors
Power Consumption: 1.5PU
Mounting: 6.3"-10"mm


more : http://www.aclighting.com

Lighting - Universals

The Universal color changer is the first of our new generation of advanced feature color changers. The Universal has been designed to maximize flexibility & usability by incorporating advanced design features. Our integrated universal mounting system adjusts between 147-275mm & mounts fixtures with up to 50 degree beam angles without light loss. DMX control for fan speed, scrolling speed, gel-saver mode & reset is now incorporated. Requires additional power supply.


Specifications:
Product Code: CQMU Click for larger image

A: 14.1"
B: 13.5"
C: 2.9"
Weight: 5.5lbs
Aperture: 8" rear
Frame Capacity: 2-24 colors
Power Consumption: 1.5PU
Mounting: 5.8"-10.8"



more : http://www.aclighting.com

Lighting - Broadway

The Broadway is specifically designed for low noise environments & features a unique cooling system comprising of three low noise fans. With its constant tension system the color scroll will remain evenly aligned & tensioned at all times. The Chroma-Q Broadway fits a wide range of smaller aperture fixtures, including the ETC Source 4™, Altman Shakespeare & Selecon Pacific. Requires additional power supply.



Specifications:
Product Code: CQ2 Click for larger image

A: 8.1"
B: 9.5"
C: 3"
Weight: 2.3lbs
Aperture: 5"
Frame Capacity: 2-16 colors
Power Consumption: 1PU

Accessories:
MP10 6.3"×6.3", Ø 5"


more : http://www.aclighting.com

Lighting - Color Changers

The new Chroma-Q™ Plus color changer builds on the great success of the Original color changer and adds new, advanced features, while maintaining the affordable price.
With over 30,000 units sold worldwide, the Original's industry proven performance and reliability is combined in the Chroma-Q™ Plus with new electronic features, increased capacity and other enhancements - providing even greater flexibility and usability.


Specifications:
Product Code: CQ1-DP Click for larger image

A: 285mm / 11.3"
B: 295mm / 11.6"
C: 89mm / 3.5"
Weight: 2.1kg / 4.5lbs
Aperture: 175mm / 6.8"
Frame Capacity: 2-20 colours
Power Consumption: 1PU



Accessories:
MP1 251×254mm/10"×10", Ø 165mm/6.5"
MP2 191×191mm/7.5"×7.5", Ø 165mm/6.5"
MP3 159×159mm/6.25"×6.25", Ø 125mm/5"
MPU Universal mounting plate


more : http://www.aclighting.com

Notebook - Samsung Q1 Ultra ultra-mobile PC

Intel's new Steeley processor and McCaslin platform make for a solid UMPC


Microsoft and Intel's joint Ultra-mobile PC (UMPC) concept has almost solely been carried by Samsung on the manufacturing front.



One of the most significant changes over the original Q1 released in April 2006 is the use of Intel's new processor from the A100 series, codenamed Steeley. Samsung has fitted the A110 chip that runs at 800MHz with 512KB L2 cache.



It's part of the McCaslin platform that includes a variant of Intel's 945 chipset and Intel's GMA 950 integrated graphics. A total of 1GB of DDR2 Ram is included, which is double that of the original Q1, and a 60GB 1.8in mechanical hard disk.



We couldn't get the Q1 Ultra to run PCmark05 fully since it failed on the transparent window test, but we did pull CPU and memory scores out of it, returning 1,116 and 1,392 respectively. This is more than double what the Medion Rim 1000 UMPC managed and about the same as Samsung's original Q1.



The most immediately obvious upgrade is the Qwerty keyboard - although calling it a keyboard is stretching the definition since its buttons aren't bigger than a mobile phone's keypad. It's no where near as usable as the keyboard on Sony's UX1 or the Medion Rim 1000 and the keys won't welcome large fingers.



Those of us in the office with slimmer digits did find it a pleasant addition though. The Dialkeys application remains as the on-screen virtual keyboard alternative.



The joystick on the left now controls the cursor rather than being a glorifi ed directional-arrow stick. When combined with the left and right click buttons on the opposite side, it mimics a Playstation Portable's usability.



The Q1 Ultra's 7in widescreen display is the most impressive UMPC screen to date. As well as being touch-sensitive and properly calibrated, it's rated at a bright 300nits. The most crucial improvement is the resolution has been increased to 1,024x600, which offers masses of extra desktop space compared to the old Q1.



Video playback was impressive on the screen and no chore for Intel's new processor either. Where Medion struggled with a 130Kbits/sec MPEG4 file, the Q1 Ultra breezed through it. Stereo microphones and a front facing 0.3-megapixel webcam means video conferencing is definitely on the cards; a significant omission on the previous Q1. A 1.3-megapixel webcam also sits on the rear of the device which is great for snapping footage on the go.

Samsung has included two batteries as standard with the Q1 Ultra. With the Wifi turned off, the standard three-cell pack lasted three hours and 38 minutes in our basic reader test. This makes it 20 minutes longer lasting than the Medion. It's also a significant improvement compared to the original Q1. The extended six-cell pack adds 7mm of bulk to the back of the unit but increases battery life to a hefty six hours and two minutes.



A familiar selection of ports is present on the Q1 Ultra including two USB, Ethernet, 3.5mm headphone jack and VGA out. There's also an SD card reader, replacing the Compact Flash reader on the previous version.



While it may seem like a minor point, Samsung's inclusion of a padded case is important since it's vital to keep the UMPC free from scratches and dents; Medion's Rim 1000 doesn't come with such a case and our review unit was soon damaged.



Vista Business is the operating system and, while Aero works fine, it's not particularly nippy. To make up for the lack of Media Center in Vista Business Edition, Samsung has installed AV Station software which does pretty much the same thing. There's a button on the left edge to quickly activate this program.



The jury is still out as to whether UMPCs are genuinely useful, especially when the Q1 Ultra weighs 690g which is comparable to some small notebooks with full keyboards. Samsung says schools can benefit from such devices, but we think £800 is a expensive if you have to kit out several hundred children. We'd also like to see the optional GPS module included as standard.



However, the Q1 Ultra remains one of the cheapest UMPCs you'll find and it's definitely the best model we've tested so far. Of course, it's not perfect – the keyboard and general usability still need improving – but its build quality and performance is better than the alternatives from Sony and Medion, and we're looking forward to Samsung's next entry in the UMPC market.


more : http://www.itweek.co.uk

Notebook - Apple aims 3G iPhone at firms

New iPhone comes with ActiveSync support for Exchange


Apple is targeting enterprise customers with the much anticipated update of its iPhone mobile device, which adds ActiveSync support for Microsoft Exchange servers and is now backed by an SDK for application development. But, experts still believe Apple is unlikely to displace established mobile platforms.



The iPhone 3G is set to be available in the UK from O2 on 11 July, but pricing and tariffs have yet to be confirmed by the carrier. As well as support for 3G networks, the device has built-in GPS capability and ships with either 8GB or 16GB of Flash storage.



Apple has made much of new enterprise features, with chief executive Steve Jobs drawing attention to its support for Microsoft Exchange ActiveSync, which will enable users to get push email and let administrators remotely wipe the device if lost.



But Jeremy Green, principal analyst for enterprise mobility at Ovum, doubted whether it would attract enterprise interest, at least officially.



"There is a lot of prejudice among CIOs against giving users consumer phones. The iPhone is seen as a consumer device and this will count against it," he said.



The new device looks almost identical to the first iPhone, with a touch-sensitive display in place of a physical keyboard. This is one reason that the iPhone is unlikely to challenge devices such as the BlackBerry, but Green said there are others.



"I'm not convinced Apple is there yet on security and manageability. It faces an uphill struggle compared to the more established enterprise platforms," he said, adding that the iPhone is "not a BlackBerry killer."



However, the fact that Apple now supports Exchange email means that some devices are almost certain to find their way into companies via the back door, as employees buy them privately and then start using them for business.



Ironically, BlackBerry maker RIM is rumoured to be developing a device similar to the iPhone for release later this year. Some enthusiast sites have reported seeing a touch-screen model codenamed the BlackBerry Thunder. RIM, however, has declined to comment on unannounced models.



At Apple's worldwide developer conference, the firm also previewed the next version of its OS X desktop platform. Codenamed Snow Leopard, this will bring better support for multi-core processors, larger memory sizes, and Microsoft Exchange support. The update is due for release next year.


more : http://www.itweek.co.uk

Notebook - OQO Model E2 HSDPA ultra-mobile PC

High-speed broadband in a well-built diminutive device

Price: £1,369.11
Manufacturer: OQO 01279 822 090
Will Stapley, Personal Computer World, 04 Jan 2008


OQO launched its ultra-mobile PC (UMPC) in September 2007 and has now released an upgrade complete with a built-in HSPDA module for high-speed mobile broadband.



Housed in an extremely small chassis, the Model E2 weighs just 500g and is sturdily built.



The screen shifts up to reveal a Qwerty keyboard and numeric keypad along with a small and rather fiddly mouse control.



There’s a good amount of spacing between each key, although you won’t be able to use all 10 fingers - most people are likely to use just their thumbs. Additional keys are limited to left and right mouse buttons and zoom control. Controls for volume, brightness and a Vista Start button are noticeable by their absence.



The bottom of the chassis is home to a USB2 port, docking connector, audio jack and built-in microphone. There’s also an HDMI port, but this should be seen as a smaller alternative to a VGA or DVI output and not a way of watching high-definition movies on an HDTV since it’s not HDCP compatible. Regardless of HDCP support, HD video is well beyond the graphics capabilities of the Model E2.



OQO has gone for a 1.6GHz Via processor, namely the C7-M ultra-low voltage chip, and supplied it with 1GB of Ram. Via’s VX700 chip handles the graphics and since it has no dedicated Ram it ends up stealing what it needs from the main system memory. OQO has also stuck with a standard 1.8in 80GB model spinning at 4,200rpm rather than a solid-state drive.



On our test system, Vista Ultimate took a total of one minute, 45 seconds to boot. Once up and running, it was perfectly capable of browsing the internet, dealing with Word documents and the like, but loading individual programs was frustratingly slow. Even simple tasks such as opening the Control Panel or a browser window took a good few seconds.



The new HSDPA module lets you browse the internet at high speed whenever an HSDPA signal is present. Should you drop out of an HSDPA area, it will continue at slower GPRS speeds. In our tests, using T-Mobile’s network, we couldn’t get above 400Kbits/sec - well short of the 3.6Mbits/sec synchronisation speed.



HSDPA speeds are limited by various factors including contention, which in central London can slow things to a crawl, but we were hoping for faster. Don’t forget you’ll need to provide your own Sim card to use this service, preferably with an unlimited data tariff.



The 5in screen has a native resolution of 800x480, which doesn’t leave much room for the Vista desktop. The Model E2 can work at 1,000x600 or 1,200x720, but the quality drops as it shifts from its native resolution. The touchscreen requires an OQO Digital Pen (£20), so finger navigation is out, but vertical and horizontal scrolling can be performed by hand using the two strips at the bottom right of the screen.



Battery life was disappointing, with the standard 4,500mAh battery providing just two hours’ usage. A 9,000mAh battery is available for £120. The Model E2 also runs hot, with audible fans attempting to cool things down. It’s not going to burn you, but it will become uncomfortable over extended periods of time.



This new HSDPA Model E2 is compact, well built, features a usable keyboard, and beats Medion’s Rim1000 and Sony’s UX1. But we still prefer Samsung’s Q1 Ultra with its faster Intel processor, larger screen and better battery life. It’s also much cheaper at less than £1,000.


more : http://www.itweek.co.uk

Connector - ABM-1700

BNC-Male Crimp Connector for Cable Types: RG58/141/142‚ Hyperlink CA195RW‚ WBC195‚ LMR195‚ Belden 8240/8219


Electrical
- Impedance : 50 Ohms
- Frequency Range : DC ~ 4 GHz
- Voltage Rating : 500 Volts Peak
- Dielectic Withstanding : Voltage 1500 Volts RMS
- Insertion Loss : .20 dB Max.


Mechanical
- Mating : 2-Stud Bayonet Coupling
- Cable Attachment : Hex Braid Crimp
- Center Conductor Cable : Attachment Crimp or Solder
- Cable Retention : 30 lbs. Pull



Material
- Body : Nickel Plated Brass
- Contact : Gold Plated Brass
- Insulator : TFE
- Ferrule : Nickel Plated Brass



Environmental
- Temperature Range : -55°C(-67°F) to +85°C(+185°F)
- Temperature Cycling : MIL-Std. 202 Method 102 (Test Condition D)
- Weatherproof : All BNC Connectors are Weatherproof
- Moisture Resistance : MIL-Std. 202 Method 106
- Corrosion : MIL-Std. 202 Method 101 (Test Condition B)
- Vibration : MIL-Std. 202 Method 204 (Test Condition D)
- Altitude : MIL-Std. 202 Method 105 (Test Condition C)



more : http://www.altelicon.com

Surge Protector - AL-CAT5JW

Compact Weather Resistant 10/100 Base-T CAT5 Data Lightning Surge Protector with RJ45 Jacks

Features
- 10/100 Base-T CAT5 protection - 802.11af Modes A and B Power-Over-Ethernet compatible - Protects 4 data pairs - Supports use of shielded CAT5 cable - Cisco® Reverse Polarity PoE compatible - RJ45 Jacks - Impact and weather resistant - Locking hinged cover - RoHS Compliant

The Altelicon AL-CAT5JW is a Compact Weather Resistant Lightning Protector which provides lightning and surge protection for CAT5 data applications. The unit is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both modes A and B of the 802.11af standard for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.

High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +/- 58 volts on the four cable pairs. The unit is compatible with both normal and inverted polarity voltage PoE equipment.

For maximum protection two AL-CAT5SW units should be used, one at each end of the CAT5 cable.
This Lightning Protector is compatible with both 10 Base-T and 100-Base devices as well as Power-over-Ethernet (PoE) devices, including Wireless Access Points, Wireless Client Devices, Access Servers, Outdoor Routers and IP Cameras. A ground lug and terminal is provided in the lightning protector housing providing superior grounding. The unit also supports the use of shielded CAT 5 cable.

The compact weather resistant housing features a lockable hinged cover and break-away holes are provided on the rear of the enclosure for mounting. The cable grommet may be adjusted to cable size and are removable.

This lightning surge protector is compatible with Cisco Aironet® 1100 and 1200 series access points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.

Electrical Specifications
- Ethernet Connectors (2) RJ45 Jacks
- PoE Clamping Voltage 58 Volts


Mechanical Specifications
- Enclosure Material PVC
- Enclosure Color Gray
- Grounding 12 AWG Max.
- Operating Temperature -40 C (-40 F) to +80 C (+176 F)
- Weight .27 lbs. (.12 kg)
- Dimensions ;(WxHxD) 3.06 x 1.93 x 4.06 (inches) ;78 x 49 x 103 (mm)
- RoHS Compliant Yes


more : http://www.altelicon.com

Obstruction Lighting - ObstiVision XGP 338 (Philips)

A dedicated maintenance-free obstacle light for aviation warningpurposes. Light emitting diode (LED) technology is chosen to be the light source of this product.ObstiVision is suitable to be used as a Low Intensity,Type Aobstacle light according to ICAO standards.Type B obstacle lightwith higher intensity is also available upon request.

Product Compliance
International Civil Aviation Organization (ICAO) standardsand recommended practices - Aerodromes Annex 14 Volume 1,3rd edition, July 1999, Federal Aviation Administration(FAA) standard

Main application
Airfields Telecommunication towers Tall buildingsPower transmission towers

Features
• Extremely long lamp life of 100,000 hours
• Energy savings of up to 95%
• Quick pay-back period of 1 year or less

Technical Descriptions Mechanical

• Yellow powder painted highpressure die-cast aluminium housing
• Clear glass cover – 5mm thick
• Stainless steel plate to support LED unit
• Operating temperature = -40°C to +70°C
• IP65
• Wind load at 200 km/hr of less than 40 Newton force
• Threaded base for 1 inch in diameter size of pipe (other size can be applied with the reducer or enlarger)

Electrical

• Standard type using nominal operating voltage of 48Vdc or 220-240Vac; 12 Vdc and 24 Vdc systems are available upon request
  
• Terminal block for 2 x 1.5mm2 cables
• Power consumption: 5W for 48Vdc version and 7W for 220 240Vac version
• Constant current 100mA
• Surge protection device integrated: according to Institute of Electrical and Electronics Engineers (IEEE) requirement Optical
• Luminous intensity of greater than 10 cd for low intensity type A obstacle light (low intensity type B obstacle light is available upon request and has luminous intensity of greater than 32 cd)
• Horizontal radiation coverage 360°
• Vertical radiation coverage 50°
• Color: aviation red, choice of fixed or flashed light Installation and mounting
• Pipe installation: the standard luminaire comes with threaded base – ready to be installed with threaded pipe of 1 inch in diameter (other size of pipe – use standard reducer or enlarger)
• To attach ObstiVision with existing attenna / pipe or wall mounted installation, the mounting kit is required.
  

Accessories

• Control box
• Photo switch and sensor
• Mounting accessories (please check with your local Philips agent)
• 3-way and 4-way junction box for through-wiring
• Solar cell
  

More : contact me in web.solusi@gmail.com

Security Sensor System - 1400 Direct Wire Ionization Smoke Detector

Specifications
Diameter: 5.5 inches (140 mm)Height: 3.12 inches (80 mm)Weight: 0.7 lb. (310 g)Operating Temperature: 0°C to +49°C (32°F to 120°F)Latching Alarm: Reset by momentary power interruption.Operating Humidity: 10% to 93% Relative Humidity, Noncondensing

Electrical Ratings:
System Voltage: 12/24 VDCMaximum Ripple Voltage: 4 Volts peak to peakStart-up Capacitance: 0.02 μA MaximumStandby Ratings: 8.5 VDC Minimum35 VDC Maximum100 μA Maximum

Alarm Ratings: 4.2 VDC Minimum at 10 mA6.6 VDC Minimum at 100 mAAlarm current must be limited to 100 mA maximum by the control panel. If used, theRA400Z Remote Annunciator operates within the specified detector alarm currents.
Reset Voltage: 2.5 VDC MinimumReset Time: 0.3 S MaximumStart-up Time: 35 S Maximum



Before Installing
Please thoroughly read the System Sensor manual A05-1003, Applications Guide for System Smoke Detectors. Thismanual provides detailed information on detector spacing,placement, zoning, wiring, and special applications. Copiesof this manual are available at no charge from SystemSensor. (For installation in Canada, refer to CAN/ULCS524,Standard for the Installation of Fire Alarm Systemsand CEC Part 1, Sec. 32.)

General Description
System Sensor 1400 dual-chamber ionization smoke detectorsutilize state-of-the-art, unipolar sensing chambers.These detectors are designed to provide open area protection,and to be used with compatible UL-listed, 2-wire controlpanels only. The detector’s operation and sensitivitycan be tested in place.Each detector includes an LED that provides a local visualindication of the detector’s status. The LED blinks everyten seconds as an indication that power is applied to thedetector and lights continuously in alarm. These detectorsalso have the latching alarm feature. The alarm can be resetonly by a momentary power interruption.The detector also has provision for the connection of anoptional Model RA400Z Remote Annunciator. The RA400Zprovides a visual indication of an alarm and mounts to asingle gang box.

Spacing
NFPA 72 defines the spacing requirements for smokedetectors. Typically, this is 30 feet when the detectors areinstalled on a smooth ceiling. However, ALL installationsmust comply with NFPA 72 and/or special requirements ofthe authority having jurisdiction.

Mounting
Each 1400 detector is supplied with a mounting bracket kitthat permits the detector to be mounted:1. Directly to a 31⁄2 inch or 4 inch octagonal, 11⁄2 inch deepelectrical box, or 2. To a 4 inch square electrical box by using a plaster ringwith the supplied mounting bracket kit.

Installation Wiring Guidelines
All wiring must be installed in compliance with theNational Electrical Code and all applicable local codes andany special requirements of the authority having jurisdiction,using the proper wire size. The conductors used toconnect smoke detectors to control panels and accessorydevices should be color-coded to reduce the likelihood ofwiring errors. Improper connections can prevent a systemfrom responding properly in the event of a fire.For signal wiring (the wiring between interconnecteddetectors), it is recommended that the wire be no smallerthan AWG 18. However, the screws and clamping plate canaccommodate wire sizes up to AWG 12. The use of twistedpair wiring for the power (+ and –) loop is recommendedto minimize the effects of electrical interference.
Smoke detectors and alarm system control panels havespecifications for allowable loop resistance. Consult thecontrol panel manufacturer’s specifications for the totalloop resistance allowed for the control panel being usedbefore wiring the detector loops.Begin electrical connections by stripping about 3⁄8″ insulationfrom the end of the wire. Then, slide the bare end ofthe wire under the clamping plate and tighten the clampingplate screw. A wiring diagram for a typical 2-wire detectorsystem .NOTE: Break the wire at each terminal to ensure that theconnections are supervised. Do NOT loop the wireunder the terminals.
System Sensor smoke detectors are marked with a compatibilityidentifier located as the last digit of a five digit codestamped on the back of the product. Connect detectorsonly to compatible control units as indicated in SystemSensor’s compatibility chart which contains a current listof UL-listed control units and detectors. A copy of this listis available from System Sensor upon request.

Tamper-resistant Feature
This detector includes a tamper-resistant feature that effectivelyprevents removal of the detector without the use ofa tool. To make the detector tamper-resistant, break offthe smaller tab at the scribed line on the tamper resistanttab, on the detector mounting bracket (see Figure 2), theninstall the detector. To remove the detector from the bracketonce it has been made tamper resistant, use a small screwdriverto depress the tamper-resistant tab located in theslot on the mounting bracket and turn the detector counterclockwisefor removal.

more :
3825 Ohio Avenue, St. Charles, Illinois 601741-800-SENSOR2,
FAX: 630-377-6495
http://www.systemsensor.com

or
Jl. Zamrud IV Blok.A - 2, Vila Mutiara, Ciputat, Jakarta Selatan - 15413
T. +62 21 98875327, 98271062, 74632117
F. +62 21 7412978Sms0815-1462-0538
Email.
ichtusindonesia@yahoo.com
ichtusindonesia@telkom.net

Website.
http://www.ichtusindonesia.indonetwork.net
http://ichtus-indonesia.page.tl
http:// firesecurity.multiply. com
http:// ichtusindonesia.wordpress.com

Knowledge - MLP

MLP (Master License Program) is an innovative purchasing program that enables customers to meet the high-volume software demands of global enterprises. MLP provides substantial and immediate volume discounts through a streamlined, flexible purchasing process that eliminates the paperwork and red tape often associated with traditional contract licensing programs.

CA Master License Program
Buying Industry-Leading Software for Large Organizations Has Never Been Easier The Computer Associates (CA) Master License Program (MLP) is a high-volume software license program that offers substantial discounts on CA software. Designed for organizations with large computing environments, including government agencies, MLP reduces the cost of evaluating, acquiring, maintaining, upgrading, and managing CA software.

Step-By-Step Savings
Becoming an MLP member is a simple process. Every product and service offered through MLP has a point value associated with it. You can buy a broad range of CA Solutions without the product pool restrictions often associated with licensing. To buy through MLP, you agree upfront to purchase products and services that equal designated point values as outlined here:
MLP Requirement Purchase (in points)

• Initial Purchase : 2.000
  
• End of Year 1 : + 1.500
• End Of Year 2 : + 1.5002-
• Year Total := 5.000

You can mix and match products to accrue the points needed to fulfill your two-year commitment and receive your discount. If you are an eligible Government Institution, you automatically qualify for MLP - without any minimum purchase requirements.

Steps 1
Contact Programmer's Paradise and enters MLP with a commitment to purchase at least 5,000 points worth of software and services over a two-year period.

Steps 2
A minimum purchases of 2,000 points is required on your first order.

Steps 3
At the end of the first year of your agreement, another 1,500 points purchase is required. Therefore a total of 3,500 points (2,000 + 1,500) must be accrued in the first year of your agreement.

Steps 4
In the second year, another purchase of 1,500 points is required, bringing your grand total for the two-year term of your MLP agreement to 5,000 points.

Right away, with the first order, you'll receive your MLP discount.
You'll continue to receive that discount as you fulfill your agreed-upon purchase milestones over the course of the eight-quarter term. Periodic checkpoints and compliances are available throughout the life of the contract to help you reach your purchasing goals.

Each initial MLP order is shipped with the MLP Solutions Kit FREE of charge.
The MLP Solutions Kit contains all the media you need to install your new CA software quickly and easily. MLP allows you to immediately deploy and use CA software products so you always have access to software when and where it is needed - without having to manage multiple license keys or acquire and ship.

It also includes a Media Pack of 30-day live trial software of other CA products that fall into the solution area you purchased from such as storage, security, or data modeling. Just try the trial CDs included in the kit, and if you choose, you can easily convert them into fully-licensed product. No reinstallation is necessary in most cases.

Knowledge - OLP

OLP (Open License Program), an easy-to-use, cost-effective purchasing program designed to meet the needs of businesses of all sizes. It reduces the costs associated with acquiring, implementing, and maintaining CA software. OLP offers streamlined purchasing and centralized license management.

OLP Member Benefits

1. Single License Key for Multiple Installations
2. Streamlined Media Pack
3. Simplified Product Registration
4. Easy-to-Understand Pricing Structure
5. Academic Pricing
6. Quick Quotes
7. Worldwide Availability
8. Easy Product Reorder

CA Open License Program
SMART PURCHASING MADE EASYThe Computer Associates (CA) Open License Program (OLP) is an easy-to-use, cost-effective purchasing program designed to meet the needs of businesses of all sizes. OLP reduces costs and streamlines the acquisition, implementation, deployment, and maintenance of CA software and services. And now it's even easier for you to qualify for these discounts, and easier for you to install and to register your new software.

Step by Step Savings
With OLP, it is even easier than ever to benefit from licensing. In many cases, purchasing just two copies of CA software can qualify for enrollment in the Program. You can buy a broad range of CA Solutions without the product pool restrictions often associated with licensing.

Steps 1
Each product and service has a point value. 40-points or more in the initial order automatically qualifies you for participation in the Program for a 2-year period.

Steps 2
Purchase the OLP Media Pack (10 Points) in the initial order. (Optional for re-orders)

Steps 3
Purchase Upgrade Protection, education, etc.

Steps 4
Reorder additional CA solutions and benefit from your Program discount for 2 years.

OLP Media Pack
Included with your initial order is a Media Pack that includes your License Certificate, the latest versions of the CA software you selected, plus a variety of related product live trials in the solution area you purchased. Your Media Pack also contains a set of related trial product CDs. These trial products are easy to try and simple to buy. Should you decide to purchase any of these trial products, an OLP reorder enables you to easily activate most products without reinstallation.

Wireless - FreeCon WAP-1001 :: 11g Wireless Outdoor Access Point

Ideal Outdoor Wireless Solutions

LevelOne WAP-1001 wireless outdoor access point with built-in 12dBi directional antenna provides a cost-effective, high-speed outdoor wireless solution. With the proven technology, WAP-1001 delivers data rates of up to 108 Mbps in the 2.4 GHz frequency band, and outstanding performance in all aspects.

Multiple Operations

Our WAP-1001 supports AP/ AP Client/ Bridge/ Repeater multiple operation modes. By setting this device into the AP client mode, it can provide any Ethernet device with instant wireless networking capabilities by placing Ethernet devices anywhere to enable interoperability among wireless network and Ethernet devices. The Repeater mode operation can repeat wireless signals from AP to wireless clients thus extending the WLAN range. There are two different approaches to Bridge modes: point-to-point, which allows to bridge netwrok between two remote locations; and point-to-multiple point, which is normally used for business ISPs, warehouse connections, campus overages and last mile applications.

Robust Security

Security is the most important issue for wireless connections. In addition to providing basic security control by using ESSID and 64/128/152-bit key length WEP encryption, this access point also supports such advanced security features as WPA-PSK and WPA to provide enhanced level of security, MAC access filtering and ESSID broadcast disable function to protect your network from unauthorized access.

Easy to Install and Management
The WAP-1001 features IP66 rated watertight and weatherproof metal housing to avoid water invasion and weather corrosion, thus making it ideal for outdoor installations. The built-in POE function allows you to reduce power cable and adapter expenses and increase location options while deploying wireless outdoor AP installation anywhere.All configuration and maintanance of this AP can be done with a web browser throught the web-based management interface.With features including low cost, low power consumtion, high security and good wireless coverage, WAP-1001 allows service providers or enterprises to deploy WAN or LAN rapidly for their customers.

Key Features

• Complies with IEEE 802.11b/g standards
• Built-in 12dBi directional antenna
• Highly efficient design mechanism to provide unbeatable performance
• IP-66 rated water-resistant and weatherproof metal housing
• Power over Ethernet design to eliminate power cable and adapter expanse
• Supports AP/ Wireless Client/ Repeater/ Point-to-Point, Point-to-Multi Point bridge Modes
• Support 64/128/152-bit WEP encryption, WPA and WPA-PSK wireless security
  

Technical Specification

• Standard Conformance
  IEEE802.11b/g
  IEEE802.3; IEEE802.3u; IEEE802.3x
  
• LAN Port
  1 x 10/100 Mbps Auto-MDIX RJ-45 Ethernet port
  Radio Operation
  
• Modulation
  IEEE802.11b: CCK, DQPSK, DBPSK
  IEEE802.11g: OFDM
  
• Frequency Band
  America/FCC: 2.412~2.462 GHz (11 Channels)
  Europe CE/ETSI: 2.412~2.472 GHz (13 Channels)
  Japan: 2.412~2.484 GHz (14 Channels)
  France: 2.457~2.472 GHz (4 Channels)
  
• Data Transfer Rate
  802.11b up to 11 Mbps (1/2/5.5/11 Mbps)
  802.11g up to 54 Mbps (6/9/12/18/24/36/48/54 Mbps)
  Super G up to 108 Mbps
  
• Sensitivity
  -88dBm@11Mbps, PER<8%
  -74dBm@54Mbps, PER<10%
  
• Antenna Type
  Integrated 12dBi flat panel antenna
  
• Transmission Power:
  802.11b: 18dBm
  802.11g: 14dBm
  
• Operation mode
  AP Mode/Wireless client
  Repeater Mode
  Point to Point Bridge Mode
  Point to Multi Point Bridge Mode
  Security
  WEP 64/128/152-bit encryption,
  Wi-Fi protected Access (WPA)
  WPA-PSK
  Software
  Site Survey
  DHCP Client
  Wireless access control by MAC address (deny or accept)
  WPA Support (WPA personal and enterprise)
  Web-based configuration via popular browser (MS IE, Netscape)
  Firmware upgrade via Web
  Reset to default by WebUIPhysical Spec.
  
• Housing
  IP-66 Rated housing
  
• POE Power Spec
  Power Input: 48VDC, 300mA
  Power Supply: 100~240V, 50~60Hz, 0.25A
  
• Temperature
  Operation: -20℃~+70℃
  
• Humidity
  10%~90%(non-condensing)
  
• Dimensions
  320mm(W)
  310mm(D)
  48mm(H)
  
• CertificationFCC, CE
  

Alarm and Horn - Spectra Alert Selectable Output Strobe and Horn/Strobes

SpectrAlert® Selectable Output Horns, Strobes, and Horn/Strobes offer enhanced featuresthat include the widest range of candela options available and the capability torecognize and self-adjust for either 12 or 24 volt operation. With an overall featureset that combines performance, installation ease, flexibility, and a consistent,aesthetically pleasing appearance, the SpectrAlert Selectable Output devicesprovide both the innovation and efficiency synonymous with the SpectrAlert name.

Performance
SpectrAlert selectable output wall-mount horns, strobes, and horn/strobesoffer key performance features long associated with the SpectrAlert name. The selectablecandela strobes and horn/strobes offer average current draws that are not onlylower than conventional fixed-candela SpectrAlert products, but also lower than similarselectable candela products. By consuming less current, the ability to connect even moredevices per loop is possible, resulting in a lower installed cost.

Installation
SpectrAlert selectable output horns, strobes, and horn/strobes offer thesame installation-friendly features synonymous with the SpectrAlert name, such as theoption of 2- and 4-wire operation; the ability to use standard size backboxes with noencroachment into the box; and universal mounting incorporating the labor-savingQuickClick™ feature. Such labor-savings features make wire connections simple and fast,further reducing installed cost.

Flexibility
SpectrAlert selectable output strobes and horn/strobes offer the broadestrange of candela options. In addition, the selectable output strobes and horn/strobescan operate on either 12V or 24V, with no setting required; the device recognizes andself-adjusts to the correct current automatically. Temporal 3 or Continuous tone optionscontinue to be available, in either an Electromechanical or 3kHz pattern.Aesthetics. SpectrAlert selectable output horns, strobes, and horn/strobes incorporatethe same stylish, low profile design of the conventional SpectrAlert products, for a consistentand aesthetically pleasing appearance across the entire product line.

General
SpectrAlert horns, strobes and horn/strobes shall be capable ofmounting to a standard 4˝ × 4˝ × 11/2˝ back box or a single gang2˝ × 4˝ × 17/8˝ back box using the universal mounting plateincluded with each SpectrAlert product. Also, SpectrAlert products,when used in conjunction with the accessory Sync•CircuitModule, shall be powered from a non-coded power supplyand shall operate on 12 or 24 volts. 12 volt rated devices shallhave an operating voltage range of 9–17.5 volts. 24-volt rateddevices shall have an operating voltage range or 17–33 volts.SpectrAlert products shall have an operating temperature of32° to 120°F and operate from a regulated DC or full waverectified, unfiltered power supply.

Strobe
Strobe shall be a System Sensor SpectrAlert Model listed to UL 1971 and be approved for fire protective service. Thestrobe shall be wired as a primary signaling notification applianceand comply with the Americans with Disabilities Act requirementsfor visible signaling appliances, flashing at 1Hz over thestrobe’s entire operating voltage range. The strobe light shall consistof a xenon flash tube and associated lens/reflector system.

Horn/Strobe Combination
Horn/Strobe shall be a System Sensor SpectrAlert Model listed to UL 1971 and UL 464 and shall be approved forfire protective service. Horn/strobe shall be wired as a primarysignaling notification appliance and comply with the Americanswith Disabilities Act requirements for visible signaling appliances,flashing at 1Hz over the strobe’s entire operating voltage range.The strobe light shall consist of a xenon flash tube and associatedlens/reflector system. The horn shall have two tone options, twoaudibility options (at 24 volts) and the option to switch betweena temporal 3 pattern and a non-temporal continuous pattern.Strobes shall be powered independently of the sounder with theremoval of factory installed jumper wires. The horn on horn/strobe models shall operate on a coded or non-coded power supply(the strobe must be powered continuously).

Synchronization Module
Module shall be a System Sensor Sync•Circuit listedto UL 464 and shall be approved for fire protective service. Themodule shall synchronize SpectrAlert strobes at 1Hz and hornsat temporal 3. Also, the module shall silence the horns on horn/strobe models, while operating the strobes, over a single pair ofwires. The module shall be capable of mounting to a 411/16˝ ×411/16˝ × 21/8˝ back box and shall control two Style Y (class B) orone Style Z (class A) circuit. Module shall be capable of multiplezone synchronization by daisy chaining multiple modules togetherand re-synchronizing each other along the chain. The moduleshall not operate on a coded power supply.

More :

Jl. Zamrud IV Blok.A - 2, Vila Mutiara, Ciputat, Jakarta Selatan - 15413
T. +62 21 98875327, 98271062, 74632117
F. +62 21 7412978
Sms +62 815-1462-0538

Email.ichtusindonesia@yahoo.com ichtusindonesia@telkom.net
Website :

http://ichtusindonesia.indonetwork.net
http://ichtus-indonesia.page.tl
http://firesecurity.multiply.com
http://ichtusindonesia.wordpress.com

Backup - Plus Recovery

POWER RECOVERY ® is a powerful Data Recovery Software that will scan and find lost partitions, boot sectors and other file system components. POWER RECOVERY Professional ® can detect drives even if they are not visible in explorer. The full directory structure of the drive is displayed (Even on NTFS Drives where it is recoverable) and the built in search feature makes finding files much easier. The Recovery Wizard allows even novice users to successfully recover lost data.

POWER RECOVERY Professional ® allows you to recover data from:

• Lost or Deleted Partitions
• Accidental or Malicious Formats
• Installations Gone Wrong
• Virus Attacks- Deletions
• Local or over a network
• Virtually Any Logical Disk Disaster
  

Even if your computer has severe file system corruption, POWER RECOVERY can locate, recover and restore lost data. This program is an efficient disk recovery software providing you a complete answer to data loss.POWER RECOVERY is available in a single machine license for end users ( Single Lisence) and a traveling license for technicians ( Commercial Lisence). Download our Free data recovery software today !.

more : http://www.powerecovery.com

Backup - Cobian Backup

Cobian Backup exists in 2 versions: An Unicode version that works on NT based systems only and an ANSI version which works in all versions of Windows. Please note that no new features will be added to version 7. All the development will be now done on version 8.

• Version 8 Black Moon
  For Windows NT, 2000, XP, 2003, Vista
  Latest version: 8.2.0.171
  
  
• Version 7 Luz de Luna
  For Windows 95*, 98, ME, Windows NT, 2000, XP, 2003, Vista
  Latest version: 7.6.0.353

Features

• Cobian Backup is a multi-threaded program that can be used to schedule and backup your files and directories from their original location to other directories/drives in the same computer or other computer in your network. FTP backup is also supported in both directions (download and upload).
  
  
• Cobian Backup exists in two different versions: application and service. The program uses very few resources and can be running on the background on your system, checking your backup schedule and executing your backups when necessary. Cobian Backup is not an usual backup application: it only copies your files and folders in original or compressed mode to other destination, creating a security copy as a result. So Cobian Backup can be better described as a "Scheduler for security copies".
  
  
• Cobian Backup supports several methods of compression and strong encryption.
  

New on version 8

• The program uses now Unicode functions whenever it can. Using compression and FTP will use ANSI functions, of course because of limitations on those formats or the FTP protocol. If you don't use compression or FTP, the program will always handle your file names as Unicode.
  
• The program uses now memory mapped files for inter-process communication. All the TCP communication used in older versions has been eliminated.
  
• A new method of encryption has been added: RSA-Rijndael, which uses a 256-bit Rijndael encryption with a random key that is itself encrypted used a 1024-bit RSA asymmetric key.
  
• Sensitive settings as passwords are now stored in the ini file using strong encryption
  
• The program is now a "green" application. All the files are stored in ini files. The only part that used the registry is the service, which, for obvious reasons must be installed using the registry. A green application, of course is not necessarily a good thing, but some people (often for "religious" reasons) seem to think that this is a good thing. Oh, well...
  
• A feature allows you now you execute individual tasks under different user accounts. The task will then try to impersonate the user and execute the task under that account.
  
• The 256 characters path limit is now GONE thanks to Unicode. The file and paths names can now be up to 32000 characters long.
  
• Now you can close programs using also their class names.
  
• Better SQX error handling.
  
• Full service control from the Option dialog.
  
• The mirroring effect that you got while compressing AND overwriting has been thankfully eliminated.
  
• LOTS of bugs fixed
  
• A better user interface.
  
• FTP transfers of larger files (> 2 GB are now supported)
  
  
  

New on version 7

• Designed and written from scratch
  
• Zip64 for zip files larger than 2 GB
  
• SQX compression
  
• Backup FROM and TO a FTP server
  
• Limit the speed of your FTP transfers
  
• SSL servers supported
  
• The program can now remind you if you have missed backups
  
• Strong encryption: Supported methods are Blowfish (128 bit), Rijndael (128 bit) and DES (64 bit)
  
• An open plug-in architecture to allow the program's enhancement
  
• The interprocess communication is done using TCP/IP. This allows a better communication between the program parts AND the program can be administrated from another machine anywhere in the world.
  
• Backup to multiple destinations
  
• A backup history is displayed
  
• Compressed files can now be split
  
• A new user interface
  
• Remote backup
  
• Automatically remove old backups
  
• The application can be used as a command line utility. No separate command line program is needed
  
  
  
  

more : http://www.educ.umu.se

Wireless - FreeCon WAB-2000A :: Wireless Mesh Outdoor AP - Bridge

Dual Spectrum/Tri-band Operation

LevelOne’s WAB-2000A is a powerful outdoor AP/Bridge designed for using with wireless meshed networks. WAB-2000 supports IEEE 802.11 a/b/g dual spectrum operations working in the 2.4GHz and in the 5 GHz radio bands on both AP and bridging ports. With the WAB-2000A advanced design, the Super G (Trubo A optional) technology provide data rates of up to 108 Mbps.

Self-Forming, Self-Configuring, Self-Healing mesh network

WAB-2000A allows users to build a self-organizing mesh network which doesn’t require manual configuration. Adding new AP nodes or relocating existing APs is as simple as powering them on. The network discovers the new nodes or relocated nodes automatically and incorporates it into the mesh system. WAB-2000A is also highly adaptable. If a link or devices in a mesh network goes down, the multiple paths between nodes allows traffic to travel around obstacles via other path.

Strong Security

In order to protect your network from unauthorized access, this device is able to auto-detect rogue access points. Wireless network data are protected with 64/128/152-bit WEP encryption on the AP access band and AES-CCMP encryption on the bridge. Moreover, WAB-2000 also features enhanced security with WPA2/802.11i and 802.1x user authentication.

Easy Installation and Maintanence

WAB-2000A offers a built-in POE function to eliminate power cable and adpater management while deploying wireless outdoor AP installation anywhere. With its Web-based management interface, the users can easily configure and maintain the AP through a general browser.


Key Features

• Self-forming, self-configuration, self-organizing mesh- up to 40 nodes
• Dual Radios/ Tri-band: IEEE 802.11a/b/g access point and bridge
• Super G (Turbo A optional) on access point & bridge for 108 Mbps data rates
• Simultaneously operates in AP, Bridge or Repeater modes
• Supports POE function, eliminating power cable management and cost
• Supports 64/128/152-bit WEP encryptiion
• Supports AES-CCMP/ WPA2/ IEEE 802.11i wireless security standard
• Auto-detects & reports rogue APs* Supports Dynamic Frequency Selection (DFS)
• Supports Transmit Power Control (TPC)* Rapid deployment, simplified installation
• Wireless client load balancing* Rugged, high throughput with extended range

Technical Specification

• External Ports
  1 x 10/100 Mbps WAN Ethernet port
  1 x 10/100Mbps LAN port
  3 x External antenna ports
  
• WAN Ethernet Setting
  Fixed IP
  DNCP client
  Supports 10/100 Mbps auto negotiation
  
• LAN Ethernet Setting
  10/100 mbps full/half duplex auto negotiation
  
• Device Management
  Web Server/ HTTPS
  Supports SNMP v1, v2, v3 agent
  Multiple user privileges
  
• Power
  Input Voltage: 48 VDC
  Injector input: 100~240 VAC, 50~60Hz
  Power Consumption: 25W
  
• Environment & Safety
  Operating Temperature: -5℃~+50℃
  Storage Temperature: -40℃~+80℃
  Operating Humidity: 0~95% non-condensing
  EMI/Safety: FCC Class A, CE
  
• LEDs
  Power
  WAN
  WLAN1: Activity light/ Link Ind.
  WLAN2: Activity light/ Link Ind.
  WLAN: Signal Strength
  
• Physical Spec
  Dimensions: 23.5cm(L) x 21.0cm(W) x 7.62cm (H)
  Weight: 2.5 Kg
  
  
• Wireless interface
  802.11a/b/g for AP & bridge with Super G (Turbo A optional)
  
• Operation Mode
  Access Point, Bridge/ Repeater
  
• Self-Forming, Self-configuring, self-organizing mesh
  Up to 40 nodes
  
• Channel Number
  Fixed or automatic select (optimum)
  
• Antennas (Default)
  2 x 5dBi for 802.11a and 2.5dbi for 802.11b/g Dual band omni directional antenna
  
• Security
  WEP: 64/128/152-bit encryption
  WPA-PSK
  WPA (802.1x) –Dynamic Key
  WPA2/ 802.11i
  AES-CCMP: 128-bit encryption
  Enable/disable broadcast SSID
  MAC address filtering
  Rogue wireless AP detection with email notification
  
• Wireless AP and wireless client activities monitoring
  Signal strength
  MAC address listing of wireless clients
  
• Tools and Utilities
  Ping Utility – Trace route utility
  Firmware upgrade via web
  Reboot device
  Factory default

Polycom - For Best Performance

Your SoundStation2™ performs optimally when you follow these guidelines:

• Position the SoundStation2™ in the center of the conference table or desk.
• The SoundStation2™ works best in a 10’ x 20’ room.
• Do not move the SoundStation2™ during a call.
• Do not shuffle papers near the SoundStation2™.
• Position extended microphones 7’ from the SoundStation2™ console.
• Speak at a normal conversation level, and direct your voice towards the SoundStation2™, or towards the extended microphone.
• Unplug all cords before cleaning the SoundStation2™. Do not use liquid cleaners or aerosol cleaners. Use a damp, soft cloth for cleaning.

Polycom - Troubleshooting :: Soundstation 2 non Expandable and Expandable

The telephone cable must be plugged into an analog telephone jack.

If the dial tone is not heard, verify the following:
* Check that the console is operational.
* Check that the telephone cable from the interface module is connected to an analog telephone (POTS) line.


Does Not Ring
* Check that the ringer is not turned off.
* If the volume is turned all the way down, increase the volume with the Volume buttons.


Flickering LCD
If your screen appears to flicker, it may be because you are using a certain
type of florescent lighting in your building. Move the SoundStation2™ away from the lights or replace the florescent bulbs.


Keypad Input Doesn’t Register
This could happen if you enter information too quickly. Press the alphanumeric buttons slowly.
Some buttons may not be recognized if you press them too quickly.


Muffled or “in a well” Reception
This is caused by highly reverberant rooms and people speaking too far from the microphone.
Speak closer to the console so that the microphones pick up your speech more accurately.
* Add more sound absorbency to the room.


Short Silences, Echoes, or Clipped Speech
* Do not move the SoundStation2™ console while it is in use.
* Keep your hands away from the console during calls.
* To avoid excessive noise around SoundStation2™, keep papers, cups, and other noise-producers away from
the console.
* At the beginning of each call, let someone at each location speak in turn for a few moments to enable
SoundStation2™ to adapt to its environment.
* The other parties may be using non-Polycom equipment which may cause audio performance issues.
* Try calling again; a different line may provide a better connection.


Physical Damage
* If physical damage is severe enough that the internal parts become visible, disconnect the SoundStation2™
immediately.
* Do not reconnect to the telephone network until the SoundStation2™ has been repaired.

Polycom - Tips :: How to 3 way calling with SoundStation2 non Expandable

Step 1. Press Call Button
Step 2. Dial Phone Number (1st - Ex. 856453252)
Step 3. Pres Meeting Buttun
step 4. Dial Phone Number (2nd - Ex. 823748356)
Step 5. Press Meeting Button
Step 6. Pres "#3" to connection all of communication (multi conference)

discuss : web.solusi@gmail.com

Access Controller : (3) NITGEN - NAC-3000 / NAC-2500 / Program overview

Access Manager, the access control program, consists of Access Server (server program), Remote Manager (client program), and Remote Monitor (client program). Remote Manager and Remote
Monitor can be installed and used either on a same PC together with Access Server, or on a remote PC on the network.


Access Server
Access Server communicates with the terminal and the remote manager program. It has user database and event log database, and performs fingerprint authentication in server authentication mode. The manager cannot manage the server directly, but can access and manage it only through Remote Manager and Remote Monitor which are capable of simultaneous access of up to 8.


Remote Manager
It can be connected to the server to manage database. It can also control and manage the access control terminal connected to the server via the network.


Remote Monitor
It can be connected to the server to monitor terminal status and event in real-time.

Access Controller : (3) NITGEN - NAC-3000 / NAC-2500 / Preparation before installation

1. Fingerprint sensor (USB Type)
To authenticate manager's fingerprint or register user's fingerprint on a server or client PC with the program, NITGEN fingerprint sensor and driver (Easy Installation v.1.32 or later) must be installed.
For more information on how to install, please refer to the enclosed manual (“Driver Installation for fingerprint sensor”) with the fingerprint sensor product.


2. Server and client PCs
If you have to register a lot of users or manage a lot of te rminals, we recommend installing the program on a stable PC. We also strongly recommend using the server for ace ss controller management only.


3. Network
TCP/IP protocol should be installed on the server and Client PCs. Contact your network administrator to check if a fixed IP address has been assigned to the server PC.


Installation
Run Setup.exe from the Access Manager folder in the CD, and follow all of the installation steps.

Access Controller : (3) NITGEN - NAC-3000 / NAC-2500 / Authentication types

With the NITGEN access control system, you can use fingerprints, passwords, and RF cards (optional) for authentication. Depending on customer environment, you can use one of the following authentication types as you need.


Fingerprint authentication
Use fingerprints to validate access authentication with the following
types:

• 1:1 authentication
  In this mode, you should input ID first and then your fingerprint. The enrolled fingerprint corresponding to the ID will be compared to the entered fingerprint on a 1:1 basis. The 1:1 authentication type takes a short time regardless of the number of users. There is no need to make any special settings in the system. After entering the ID, enter the fingerprint to perform authentication.
  
  
  
• 1:N authentication
  In this mode, you need to enter only fingerprint without ID. Though the authentication procedure is simple, this method will take a little longer than the 1:1 authentication if there are many users. There is no need to make any special settings in the system.
  
  
  
• Short ID (SID) authentication
  The user ID can be 4 - 15 digits long depending on the initial setting. This method simplifies ID input procedure. Instead of entering the entire registered ID, you can enter only the first part of the ID for authentication. For example, if the user ID is 1234567, enter 12 only and then the fingerprint. Then the system will perform 1:N authentication for all IDs that start with 12xxxxx. There is no need to make any special settings in the system.
  
  
  
• Group authentication
  For group authentication, you can specify a group ID of 1 - 4 digits long for each user group. You will enter a group ID and a fingerprint for authentication. For example, you can use the unit number for public housing like an apartment as a group ID. You can specify a group ID when you register a user. Unlike other methods, you must enter the group ID, and then press F1 before entering the fingerprint to perform group authentication. ( NAC-3000 only support the function of “Group authentication”.)
  

Password authentication
A password of 4 - 8 digits long is used to validate access authentication. You can use this method in such a special case as when the fingerprints are damaged.


RF card authentication (optional)
The RF card of a user is used to identify the user. The card number must be registered into the system to use the card.


Note :
The dedicated terminal to RF card supports user authorized type of password and RF card ID.

Access Controller : (3) NITGEN - NAC-3000 / NAC-2500 / How to input fingerprint?

When you enroll and authenticate user fingerprint, do the followings to avoid authentication error:

• Press your finger evenly to maximize the input area. If we say the weakest push as 0%, and the strongest push as 100%, apply 50~70% of force.
  
  
• Make sure that the core of the fingerprint is at the center. In general, the core of the fingerprint is on the same line as the lunula of the fingernail. So locate the lunula of the fingernail at the center of the fingerprint input window.

Note :
The recognition performance of the fingerprint recognition device largely depends on the skill of the user. Follow the fingerprint input method described above to improve recognition performance.

Access Controller : (3) NITGEN - NAC-3000 / NAC-2500 / Main specifications

Section

Access terminal : Connection allowed up to 255 terminals
Connection : Simultaneous server access up to 8 Clients
Number of users to register : 10,000 usersNetwork 10 Mbps, TCP/IP
Authentication type : Fingerprint, password and RF card (optional)
Algorithm ( Fingerprint ) : FRR: 0.1 % or less, FAR: 0.001 % or less
Authentication speed :
1:1 mode: Less than 1 second
1:N mode:
Avg. 2.5sec ( 1,000FP , Server )
Avg. 2sec ( 500FP, Terminal )
Avg. 1sec ( 300FP, Terminal )

* Pentium IV 1 GHz, 512 MB RAM

Access Controller : (2) NITGEN - NAC-3000 / NAC-2500 / Product Configuration

Server PC :
1. Server s/w: Access Sever
2. Terminal communication and log data collection
3. User information and log database
4. Performing authentication

Client PC :
1. Client s/w: Remote Manager/Remote Monitor
2. User registration and management
3. Monitoring terminal status and events

Terminal :
(NAC-3000, NAC-2500, Dedicated to RF card)
1. Performing user authentication
2. Door control

You can use all features with the NITGEN access control terminal(NAC-3000, NAC-2500, Dedicated to RF card) only. If you use itwith Access Manager in network environment, you can manage anumber of terminals more easily and efficiently. You can also usethe server and client software in one PC.

Access Controller : (1) NITGEN - NAC-3000 / NAC-2500 / Dedicated to RF card

Biometric systems are recently used in various authenticationsystems. They are increasingly used not only in environments thatrequire high level of security but also in many other placesbecause they are convenient and economical. Among variousbiometric systems, the fingerprint recognition system takes upmost of the market because it is easy to use as well as economicaland capable of developing various types of applications. NITGEN,a global leader in the fingerprint recognition industry, providesvarious fingerprint authentication solutions such as PC security,knowledge management, vaulting service, access control,electronic approval, and financial payment. NITGEN activelyresponds to customer needs through continuous research,development and quality management.

The NITGEN access control system is an advanced product inwhich core technologies of NITGEN recognized worldwide such asfingerprint recognition algorithm, optical sensors, embeddeddesign technology, and software application technology areorganically combined and optimized. In addition, unlike otherexisting access control systems that use passwords or ID cardsonly, it is free from such risks as loss of password and abuse orduplication of card, providing excellent convenience and security. Itis designed to maximize operational efficiency, enabling integratedmonitoring and systematic management of terminals which havebeen operated independently on a remote location via the network.

The NITGEN access control system can use various combinationsof RF card, password and fingerprint authentication. Designed tomeet both universal uses and specific uses, it can be used invarious customer environments including enterprises andgovernment agencies due to such convenient built-in features asgroup ID, short ID, 1:N Authentication, interphone and voiceinstruction.This manual describes how to install and use Access Manager thatcan monitor and manage terminals in connection with the accesscontrol terminal (NAC-3000, NAC-2500, Dedicated to RF card)