AUTOCAD 2007 >> 02. How to Create Simple Glass

Current view direction: VIEWDIR=0.0000,0.0000,1.0000
Specify a view point or [Rotate] : 1,1,1
Regenerating model.

Command: line
LINE Specify first point: 5,5
Specify next point or [Undo]: @0.5<90
Specify next point or [Undo]: @4<0
Specify next point or [Close/Undo]: @0.075<-90
Specify next point or [Close/Undo]: @3.925<180
Specify next point or [Close/Undo]: @0.425<-90
Specify next point or [Close/Undo]: c
Command: z
ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window/Object] : w

Command: fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Specify fillet radius <0.0000>: 0.05

Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command: [Enter --- ::: will be process the last command]
FILLET
Current settings: Mode = TRIM, Radius = 0.0500
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
[Use the fllet comment to all of the coorner that you need to smooth]

Command: l
LINE Specify first point:
Specify next point or [Undo]: @5<0
Specify next point or [Undo]:

Command: region [to make the area]
Select objects: 1 found
Select objects: Specify opposite corner: 2 found, 3 total
Select objects: 1 found, 4 total
Select objects: Specify opposite corner: 6 found (2 duplicate), 8 total
Select objects: Specify opposite corner: 1 found, 9 total
Select objects:
1 loop extracted.
1 Region created.


Select objects to revolve:
Specify axis start point or define axis by [Object/X/Y/Z] object: o
Select an object:
Specify angle of revolution or [STart angle] <360>:

[Finished]
more : web.solusi@gmail.com