Create Wi-Fi Network in Your Home

You can make your home network or small office without use point access switch hub or router like the peer to peer network that use NIC. The peer to peer network can be done easier and faster with 2 computer or more.

1. Setting your Wi-Fi
   
   Step – 1 Please stand by your wireless network hardware and activate.
   Step –2 Open Control Panel
   Step – 3 Select Network Connection
   Step – 4 Right Click your mouse on Network Connection icon and select Enable
   Step – 5 Right Click your mouse on Network Connection and select View Available Wireless
   Step – 6 If your wireless connection icon has found on your monitor, you can select that icon and activate
   
   
2. Create your personal Wi-Fi Network
   
   And then, if your Wi-Fi connection not ready yet, you must create that, especially on computer that will be using for Wi-Fi connection the first time.
   
   Step - 1 Open control panel on your computer
   Step - 2 select and open the Network Connection icon
   Step - 3 Select wireless connection on network wireless
   Step - 4 right click your mouse and then select and then open the wireless network page
   Step - 5 Select check status on option Use Windows to Configure my wireless network settings
   Step - 6 Press Add button on Prefered Networks.
   
   
3. Give the name of connection
   
   Write the name of connection on SSID text box.For own computer, better if the wireless connection have the password, so with that, uncheck The key is provided for me automatically,and then select Open or Share on Network Authentication drop down menu using for network ket WEP orselect WPA-None for using network WPA key and then create your password code in to the text box of Network key coulomn and confirm network key.WPA better then WEP, but not all of the hardware supporting of that facility.
   
   
4. Give password key that you using (WPA or WEP)
   
   
5. Create Ad Hoc Network
   
   The Ad Hoc network is connection of computer to computer without hub or router.
   Because of that you must check station on the option "This is a computerto computer (ad-hoc) network, wireless access points are not used" and then press Ok button
   
   
6. Starting to create the new networking
   
   Step - 1 : Open Control Panel on your computer
   Step - 2 : Select Network Setup Wizard, and following the step by step on that form.
   Step - 3 : Make sure the hardware status
   Step - 4 : Network has ready use.

by : web.solusi@gmail.com