A dedicated maintenance-free obstacle light for aviation warningpurposes. Light emitting diode (LED) technology is chosen to be the light source of this product.ObstiVision is suitable to be used as a Low Intensity,Type Aobstacle light according to ICAO standards.Type B obstacle lightwith higher intensity is also available upon request.
Product Compliance
International Civil Aviation Organization (ICAO) standardsand recommended practices - Aerodromes Annex 14 Volume 1,3rd edition, July 1999, Federal Aviation Administration(FAA) standard
Main application
Airfields Telecommunication towers Tall buildingsPower transmission towers
Features
• Extremely long lamp life of 100,000 hours
• Energy savings of up to 95%
• Quick pay-back period of 1 year or less
Technical Descriptions Mechanical
- Yellow powder painted highpressure die-cast aluminium housing
- Clear glass cover – 5mm thick
- Stainless steel plate to support LED unit
- Operating temperature = -40°C to +70°C
- IP65
- Wind load at 200 km/hr of less than 40 Newton force
- Threaded base for 1 inch in diameter size of pipe (other size can be applied with the reducer or enlarger)
Electrical
- Standard type using nominal operating voltage of 48Vdc or 220-240Vac; 12 Vdc and 24 Vdc systems are available upon request
- Terminal block for 2 x 1.5mm2 cables
- Power consumption: 5W for 48Vdc version and 7W for 220 240Vac version
- Constant current 100mA
- Surge protection device integrated: according to Institute of Electrical and Electronics Engineers (IEEE) requirement Optical
- Luminous intensity of greater than 10 cd for low intensity type A obstacle light (low intensity type B obstacle light is available upon request and has luminous intensity of greater than 32 cd)
- Horizontal radiation coverage 360°
- Vertical radiation coverage 50°
- Color: aviation red, choice of fixed or flashed light Installation and mounting
- Pipe installation: the standard luminaire comes with threaded base – ready to be installed with threaded pipe of 1 inch in diameter (other size of pipe – use standard reducer or enlarger)
- To attach ObstiVision with existing attenna / pipe or wall mounted installation, the mounting kit is required.
- Control box
- Photo switch and sensor
- Mounting accessories (please check with your local Philips agent)
- 3-way and 4-way junction box for through-wiring
- Solar cell
No comments:
Post a Comment