Description
- Sealed against fluids and dusts (IP67)
- Shock, Vibration and Traction resistant
- No cabling operation in field and no tools required
- Mechanical Coding / Polarization (2 positions)
- Improved EMI protection
With USB Field, you can insert a standard USB 2.0 cordsetinto a metallic plug which will protect it from shocks, dust andfluids.No hazardous in-field cabling and grounding!
This metallic plug is connected into a receptacle, using a Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device for high vibrations. On the receptacle side, one A USB receptacle is soldered onto a PCB allowing for the following back terminations:
- another USB-A receptacle
- solder : 4 tined holes on the PCB to solder your wires
The USB 2.0 cordset shielding is transmitted to the USB receptacle through grounding fingers. For an outstanding EMI protection, the conductive plated shells (Ni, Cd) with metallized receptacle inserts, transmit the shielding to the connector shells and finally to the panel.
Main Characteristics EnvironmentalProtection
- Sealing(whenmated) : IP67 (Temporaryimmersion)
- Salt Spray : 48 h with Nickel plating> 500 h with Olive DrabCadmium
- FireRetardant / LowSmoke: UL94 V0 and NF F 16 101 & 16 102
- Vibrations : 10 –500 Hz, 10 g, 3 axes : no discontinuity> 1micro s
- Shocks: IK06 : weightof 250 g drop from40 cm [15.75 in] onto connectors(matedpair)
- Humidity: 21 days, 43°C, 98% humidity
- TemperatureRange : -55°C / +85°C
Data Transmission
- USB Specification 2.0Data Rate : Up to 480 Mb/s for High Speed USB
- Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device
- 2 mechanical Coding / Polarization possibilities by the user (receptacle insert rotation)
- USBF TV plug retent° in the receptacle : 100 N in the axis
- Mating cycles : 500 to 1500
No comments:
Post a Comment