Fiber Optic Ethernet Switches 16-Port 10/100 Fiber Optic Switch With Management; S71650

15 UTP ports; 10/100 auto-sensing and auto-negotiating; 1 fiber port 100BaseFX; ST, SC connectors; multimode/singlemode; Distances to 15 km

FEATURES

• Provides 15 10/100Mbps switched ports and
  1 100Base-FX switched port shared with TP port 16
• Complies with IEEE 802.3 10Base-T,
  802.3u 100Base-TX and 100Base-FX standards
• Each TP port supports both 10/100Mbps auto-negotiation
  and auto-MDI/MDI-X connection
• Supports duplex operation for each port
• 2K MAC addresses and automatic MAC address learning and aging
• Store-and-forward architecture
• Broadcast storm protection
• Supports full-duplex flow control (IEEE 802.3x)
• Supports VLAN function, 15 groups of VLAN switch selectable
• Supports QoS function, the tag in an Ethernet packet contains VLAN
  and priority information of packets. Per port provides 4 transmit queues.
• Supports Ethernet frame up to 1522 bytes
• 19" rack mountable

SPECIFICATIONS

• Fiber Port: Multimode/Single Mode Duplex ST or SC connector
• Fiber Media: Multimode: 1300nm 62.5/125µm fiber cable (2km max.) Single Mode: 1300nm 9/125µm fiber cable (20km max.)
• VLAN: 15 groups set by dip switch
• Standards: IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX, 100Base-FX Fast Ethernet
• Filtering Address: Unicast/Multicast/Broadcast address: 2K MAC addresses per unit
• Filtering Rate: 14,880 pps for Ethernet, 148,800 pps for Fast Ethernet
• Forwarding Rate: 14,880 pps for Ethernet, 148,800 pps for Fast Ethernet
• Connector: Shielded RJ-45 jack
• Cables: 10Base-T: Cat. 3, 4, or 5 UTP cable (100m max.) 100Base-TX: Cat. 5 UTP cable (100m max.)
• LED Indicators: Power status, Link/Activity, Full Duplex/Collision status for each port
• Environment: Operating Temperature: 0º C to 50º , Storage Temperature: -40º to 70º C
  Relative Humidity: 5% to 95% non-condensing
• Dimension: 16.9 x 4.1 x 1.7 inch (430 x 105 x 44 mm)
• Power: 100-240 VAC, 50-60 Hz, 16W (max)

MODULES

• S70053, MM, ST, 2 km
• S70054, MM, SC, 2 km
• S70055, SM, SC, 20 km

Fiber Optic Converter :: M7260M 10/100/1000Base-T to 1000Base-X "Triple-Duty" Gigabit Ethernet Media Converter With Management

KEY FEATURES

• Tri-Speed 10/100/10000Mbps Copper to 1000M Fiber Conversion
• Supports full wire speed conversion
• Supports auto-negotiation with link partners
• Provides Loop Back Test Function
• DIP Switches for Port Operating Mode, Flow Control, Status Monitoring
• Provides Monitoring Function for Remote Link Partner's Copper Link Status
• Optional Web-Based Management
• Supports Tagged/Untagged Packet Filtering
• Supports 802.1Q VLAN, 802.1p QoS, DSCO Priority Classifications
• Supports Q-in-Q application with Double Tag Capability
• Supports SNMP Trap for Port Link Change

Specification

• Standards: IEEE 802.3, 802.3u, 802.3ab 802.3z
• Copper Port: Shielded RJ-45, 10/100/1000Mbps, Full/Half Duplex Auto-negotiation capable, Auto-MDI/MDI-X
• Fiber Port: LC (SFP Mini-GBIC) Connector 1000Mbps full duplex, Auto-negotiation, Far End Fault Support
• Network Cables: Copper Port: Cat.5e (or higher) recommended up to 100m Fiber Port: Multimode: 50/125µm, 62.5/125µm fiber cable Singlemode: 9/125µm fiber cable
• Dip Switches: Copper Port Operating Mode, Flow Control, Auto Report for Remote Copper Link Status
• LED Indicators: Port Status, Local/Remote Copper Port Status: Link/Speed/Duplex Local Fiber Port Link Status, Loop Back Test Status Far end fault Function
• Standalone Installation: Desktop, Wall, Din-Rail (optional)
• Rackmount Installation: Up to 16 units in one MCC-16 rackmount chassis with one central power source Supports optional power redundancy and management
• Environment: Operating
• Temperature: -5º ~ 55º C
• Storage Temperature: -20º ~ 85º C
• Relative Humidity: 10% ~ 90% non-condensing
• Dimension: 4.25 x 2.85 x 0.91 inch (108 x 72.5 x 23 mm)(L x W x H)
• Power Consumption: 2 Watts (max.) @ 7.5VDC
• Power Input: +5 ~+12VDC (+/- 5%)
• Management: Web-Based Browser Interface
• Port Control: Operating Mode, Flow Control
• Packet Filtering: 802.1Q Tagged Packet Filtering, Untagged Packet Filtering
• 802.1Q VLAN: Ingress 802.1Q Tag Stripping, Egress 802.1Q tagging (Tag Insertion)
• QoS: Four Priority Levels, 802.1p, DSCP-Based Priority Classifications Service Policy - Strict Priority, WFQ (Weighted Fairness Queuing)
• Monitoring: Local Port Status, Remote Port Status, Port Statistics
• Maintenance: Restore Factory Default, Reboot, Firmware Update
• SNMP Trap: Trap Events: Boot up, Login Failure, Copper Link Port Change, Fiber Port Link Change

Fiber Optic Converter :: M7250 (formerly M7256/M7257) 1000Base-T to 1000Base-SX/LX Gigabit Media Converter

KEY FEATURES

• Complies with 802.3ab 1000BaseT and 802.3z 1000BaseSX, 1000BaseLX
• Provides direct media conversion for Gigabit copper and Gigabit fiber
• Supports full wire speed conversion
• Supports transparent conversion of any packet type with no length limitation
• Supports auto-negotiation with link partners
• Extends network span to 550m (multimode); to 40Km (singlemode)
• Interoperable with other 1000Base-X NICs or Gigabit switches
• Rack-mountable in the VERSITRON MCC-16 Chassis
• Optional Din-Rail Installation
• Low power consumption

• 

Specification

• Standards: IEEE 802.3ab, 802.3z
• Copper Port: Shielded RJ-45 1000Mbps Auto-negotiation capable Auto-MCI/MDI-X
• Fiber Port: LC (SFP Mini-GBIC) Connector
• Network Cables: Copper Port: Cat.5e recommended or higher up to 100m Fiber Port: MM*1 50/125µm fiber cable, SM** 9/125µm fiber cable
• LED Indicators: Power Status, SFP On status, Link status, Optical Link status
• Mounting: Desktop, Wall, Din-Rail (optional), Rackmount Chassis
• Rackmount Chassis: Up to 16 units in one rack chasis with one central power source Supports optional power redundancy and management
• Environment: Operating −5º C ~ 55º C
• Temperature: Storage −20º C ~ 85º C
• Temperature: Relative 10% ~ 90% non-condensing
• Relative Humidity: Dimensions: 4.25 x 2.85 x 0.91 inch (108 x 72.5 x 23 mm)
• Power Input: +5 ~ +12VDC (+/−5%)
• Power Consumption: 2 watts max @ 7.5VDC

Technology Monitoring - CM6800 Matrix Switcher/Controller

MICROPROCESSOR-BASED, CROSS-POINT VIDEO SWITCHER, 32 X 6

The CM6800 Matrix Switcher/Controller is a very affordable single box solution for medium-sized matrix switch applications. This fully integrated package offers a highly versatile, cross-point matrix switcher. The CM6800 provides switching and control from any one of up to 10 keyboards. The system can also be used to control other devices, such as Genex® multiplexers.

The CM6800 provides easy to use, password-protected, on-screen programming menus. Eight different languages are supported.

The CM6800 is designed to be remotely operated from desktop keyboards or external computer systems. Programming the system is easy using on-screen menus and a system keyboard or the Windows®- based System Management Software. The Manager software allows for remote programming and external storage of all user setups.

· 32 Video Inputs, 6 Video Outputs

· Inputs Allow for Viewing and Control of Cameras, Domes, PTZs, Multiplexers, and Other Devices

· Includes Multiple Language Menus and On-screen Text

· Video Inputs Individually Selectable for Terminating or Looping with Switches on Rear Panel

· Supports Coaxitron® and RS-422 Camera Control

· Password Protected Menu Programming

· Windows®-Based Manager Software

· System Partitioning Prevents Unauthorized Viewing and Control

· Integrated Color Bar Generator

· Wide Selection of Peripheral Components, Including Keyboards, Alarm Boxes, and Relay Boxes

· Macro Programming and Event Timers Automate System Operation

· Multiple Built-in ASCII Communication Ports

· Remote Viewing and Control Over TCP/IP Networks Using PelcoNet